产品分类
联系我们
电话: 0317-591588
传真: 0317-591588
邮箱: hrrvos@dg-hhjx.com
地址: 河北省沧州市
新闻中心

详解膏体灌装机工作特点

膏体灌装机顾名思义是专门用于灌装膏体的一种灌装机,是医用压缩空气为动力,气动元件精密,结构简单、灵敏可靠,最大的特点是可以在易燃易爆的环境中工作。

Paste filling machine suggests that it is exclusively a filling machine for filling paste, medical compressed air as power, precision pneumatic components, the structure is simple, sensitive and reliable, the biggest feature is in an explosive atmosphereto work.

膏体灌装机在套作之前一定要经过全面清洗消毒,先要用无纺布加清洗剂擦去油污和污垢,之后再用无纺布擦干。膏体灌装机与液体灌装机不同的是,膏体灌装机有分为手动和自动两种,当使用手动时,只需要用瓶口轻轻推动触舌,注意开始的吸料时不要顶住触舌,而采用自动时,出料口下一定要先放瓶子,将转换开关拨到自动就会开始灌装,并会及时更换瓶子。如果灌装计量不稳定,就应该检查进料单向阀是不是有杂物夹住,从而影响灌装量。当发现缸体下部分漏料时,就说明活塞密封圈磨损,需要更换密封圈。

Before intercropping paste filling machine must be thoroughly cleaned and disinfected, the need to use non-woven fabrics plus a cleaning agent to remove grease and dirt, lint-free cloth after use. Paste filling machine, liquid filling machine, paste filling machine into both manual and automatic, when using the manual, just use the bottle gently to promote touch tongue, pay attention to the beginning of the suction withstood not to touch the tongue, while the use of automatic must first put the bottle under the spout will convert the switch will begin filling the bottle and will be promptly replaced. Filling metering is unstable, you should check that the feed check valve not stray objects, thus affecting the amount of filling. When the the cylinder lower leakage material is found, it shows the wear of the piston ring seals need to be replaced.

BACK

版权所有:河北省进长灌装机有限公司, All rights reserved

地址:河北省沧州市  电话:0317-591588  邮箱: hrrvos@dg-hhjx.com